日本制ASKER专业橡胶硬度计D型 D型深圳市鑫腾明计量仪器商行

搜索

主营产品：

日本SK牌针规，EISEN牌针规，螺纹塞规，螺纹环规。日本PEAK必佳牌放大镜，日本IMADA牌推拉力，日本KANON中村扭力工具,日本NAKANISHI中西主轴，马达，控制器。日本PEACOCK牌千分表,百分表,杠杆表日本ASKER、美国PTC橡胶硬度计，日本FSK富士水平仪，水平尺，精密花岗石平台支架等,KANETEC强力（日本）磁性工具,高斯计；脱磁器；永磁吊重磁盘；永磁夹盘；电磁架，瑞士FISSO磁性表座，CITIZEN西铁城界限量表，德国KROEPLIN内测卡规，外测卡规，瑞士MARTIN三线规，美国PI TEPE圆周尺，瑞士TITEC微小螺纹规，美国UNIVERSAL同心度仪

产品展示 PRODUCT

产品详情

查看大图

产品名称：日本制ASKER专业橡胶硬度计D型
产品型号：D型
产品厂商：日本ASKER高分子橡胶硬度计
产品文档：

你添加了1件商品查看购物车

简单介绍：

日本制ASKER专业橡胶硬度计D型ASKER橡胶硬度计测量硬度的基本因素之一是确定不同橡胶、人造橡胶及塑料制品的特性。适合特点的设计。所有的硬度计的生产及校准都是在专业人员的严格控制下进行的，可以保证并符合国内及国际标准.深圳市腾明达精密仪器有限公司总代理日本高分子ASKER橡胶硬度计中国总代理.提供五年质量保证及所有零配件及维修服务.联络电话0755-28198580/29813810

详情介绍：

日本制ASKER专业橡胶硬度计D型
产品名称: ASKER
产品型号: D
产品展商: 深圳市腾明达精密仪器有限公司
简单介绍
ASKER橡胶硬度计测量硬度的基本因素之一是确定不同橡胶、人造橡胶及塑料制品的特性。适合特点的设计。所有的硬度计的生产及校准都是在专业人员的严格控制下进行的，可以保证并符合国内及国际标准.深圳市腾明达精密仪器有限公司总代理日本高分子ASKER橡胶硬度计中国总代理.产品库存量大.技术**.提供五年质量保证及所有零配件及维修服务.联络电话0755-28198580/29813810

ASKER的详细介绍

ASKERDurometer Type D

The Type D Durometer forhard rubber (high hardness) and plastics

Used world-wide for measuring hard rubbers and plastics, andspecified in the standards of JIS K 6253, ASTM D 2240, ISO 7619,DIN53505, etc.

Features

Indentor

Height: 2.50mm Shape: Sharp ConePoint

Pressure foot

The Pressure foot in contact with thespecimen is 44mm in width and 18mm in depth, wide enough to ensureaccurate measurement.

Another type of durometer with an 18mm diameter pressure foot isavailable. In addition, the Longer Pressure Foot Type (DL Type) isapplicable for measurement of narrow or concave specimens .

Hardness TesterSelection Chart

Our product line consists of varioustypes of durometers applicable to specific materials
as indicated in the chart above.

Type A Durometer (ASKER A type), conforming to JIS K 6235 is themost popular type of durometer for measuring rubber hardness.

However, verification is recommended because a significantdifference is estimated to be the largest when a durometerindicates measurement values from 10 to 90 points.

For hard specimens for which Type A Durometer readings indicatemore than 90 points, measurements should be undertaken using theType D Durometer (ASKER D type). However, for soft specimens withmeasurements of less than 20 points, the ASKER C type or Type EDurometer (ASKER E type) should be used. The most importantconsideration in using durometers is to select the correct type forpurposes of measurement according to the specimen.

Specification

Standards

JIS K 6253
JIS K 7215
ASTM D 2240
ISO 7619
ISO 868
DIN 53505

Indicationrange

0 point - 100 point (262 degree dialscale)

Minimumindication

1 point (Accuracy : ±1 point)

Indentor Design(mm)

Height: 2.50 30°Angle Sharp Cone Point Tip Radius0.1

Spring Forces[mN(g)]

0 point:

0(0)

100 point:

44500(4538)

Central hole ofdiameter of Pressure foot

Φ3

Pressurefoot
Dimension (mm)

44×18(Rectangular)

Outer Dimension(mm)

Approx. Width 57×Depth 30×Height 76

Weight(g)

200

Application

hard rubber, plastic

Outer Dimension(mm)

A custom designed pressure foot durometer is availableaccording to specimen conditions.

Option

Two-pointer type (max-hand andactive hand) of Rubber Hardness Tester
The stationary set hand (max-hand) makes the maximum value easierto read and allows the creep characteristics of a specimen.

Accurate measurement is made possible for specimens* for whichstress relaxation occurs over time or for specimens for which it isdifficult to take readings from the front.

*Materials for which the reading decreases immediately after theindentor has been pressed against the surface.

Constant Loader forDurometer

·	Constant loarder assures uniform test pressure eliminatingfalse readings due to differences between operators in measuring byhand.
·	High accuracy and repeatability of the hardness readings areassured by the flexible joint function.

Indentor ExtensionTester

·	The gauge to check the indentor height on a durometer and thereading indicator mechanism.
·	Inspection is conducted at 2, 50, and 100 pointsrespectively.

Load Tester forHardness Tester

·	Tester to check load properties of the spring on a durometer
·	Inspection is conducted at 2, 50, and 75 pointsrespectively.

标题：

内容：

联系人：

联系电话：

Email：

公司名称：

联系地址：

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!

2.如有必要,请您留下您的详细联系方式!

产品名称：日本制ASKER专业橡胶硬度计D型

ASKER的详细介绍