| ConstantLoader for Durometer CL-150LASKER高分子制作所 |
 |
 |
Steady, stable, andreproducible hardness measurement allowed by the flexible jointsystem.
The problem with manually measuring the hardness of a rubberspecimen is that the results may vary with the operator. The CL-150series eliminates such variations. The flexible joint system makesthe pressure foot of the durometer contact perfectly with the testpiece and thus enables a precise and reproducible measurement.Furthermore, the models may be used for durometers requiringvarious measuring loads by replacing the weight. |
|
 |
| Features |
|
|
Measuring pressureload  | The durometer's pressure force to thetest piece is kept constant with the static load comprised of theweight, joint, and mechanical part. |
|
|
Measuring pressurespeed
Pressure speed to the test piece is alsokept constant with using the up-down lift with air damper. Thespeed may be changed using the adjusting knob. Unlike models with ahydraulic damper, this loader is free from oil spills and requiresno oil feeding. |
|
| Flexible jointsystem |
 | The flexible joint system enables firmcontact of the pressure foot with the surface of the test piece,even if the surface is inclined. |
|
|
MeasuringLoad
1000g, 1250g |
|
Weightreplacement  | May be used as CL-150H for 5000gmeasuring load by adding H Weight and H Flexible Joint. |
|
|
Others  | Attachable to analog and digital Askerdurometers. |
|
| Specifications |
|
|
| | Load Standdimension (mm) | | 150W×180D×Max. 430H |
| | | Table dimension(mm) | | 150W×140D |
| | | Depth frommeasuring point (mm) | | 70 |
| | | Weight(kg) | | 8.5 |
| | | ASKERdurometer | | A(AL), JA(JAL), C(C1L), E(EL), B(BL) |
| |
|
| Outer dimensions(mm) |
|
|
| Optionalaccessories |
|
|  | | Weight for HeavyLoad(Left)
CL-150HW
Flexible Joint for HeavyLoad(Right)
CL-150HJ |
| |  | | Non-flexible SmallJoint
CL-150SJ |
| |  | | Non-flexibleJoint
CL-150RJ |
|
|