产品[
Tohnichi RTD Screwdrivers
]资料
如果您对该产品感兴趣的话,可以
产品名称:
Tohnichi RTD Screwdrivers
产品型号:
12RTD
产品展商:
深圳市腾明达精密仪器有限公司
简单介绍
Tohnichi RTDTorque ScrewdriversUsed for any tightening operation such as mass production, and maintenance.The rotary slip clutch reduces the possibility of over-torque.Tohnichi RTD Screwdrivers
Tohnichi RTD Screwdrivers的详细介绍
产品名称： | Tohnichi RTDTorque Screwdrivers |
产品型号： | 12RTD |
产 地： | JAPAN |
品 牌： | Tohnichi |
测定范围： | 2~12 Kgf.cm |
最小读值： | 0.1 Kgf.cm |
精 度： | ±3% |
详细规格说明： | Tohnichi RTDTorque ScrewdriversUsed for any tightening operation such as mass production, and maintenance.The rotary slip clutch reduces the possibility of over-torque.Tohnichi RTD Screwdrivers |
牌 价： | |
Tohnichi RTDTorque Screwdrivers
Used for any tightening operation such as massproduction,andmaintenance.
The rotary slip clutch reduces the possibility ofover-torque.Oncetorque set is achieved, even if more force isapplied, thetoolratchets and does not add additional torque.
Select proper model according to unit of measureasfollowingcolor code :
Accuracy ±3%
| MODEL | TORQUE RANGE | Overall Length | Weight Approx. | Accessories |
| S.I. | METRIC | AMERICAN | min.-max. | Graduation | mm | in. | g | oz. | Handle Bar | Hook Spanner |
| S.I. | METRIC | AMERICAN | S.I. | METRIC | AMERICAN |
| - | - | RTD24Z | - | - | in·oz
6-24 | - | - | in·oz
0.1 | - | 3 15/16 | - | 1 7/8 | - | - |
| RTD50Z | 15-50 | 0.25 | 3 15/16 | 1 7/8 |
| RTD100Z | 20-100 | 0.5 | 4 5/16 | 2 7/32 |
| RTD15CN | 1.5RTD | 1.5RTD-A | cN·m
2-15 | kgf·cm
0.2-1.5 | in·lbs
0.2-1.5 | cN·m
0.1 | kgf·cm
0.01 | in·lbs
0.005 | 100 | 3 15/16 | 50 | 1 7/8 |
| RTD30CN | 3RTD | 3RTD-A | 4-30 | 0.4-3 | 0.4-3 | 0.2 | 0.02 | 0.01 | 100 | 3 15/16 | 50 | 1 7/8 |
| RTD60CN | 6RTD | 6RTD-A | 10-60 | 1-6 | 1-6 | 0.5 | 0.05 | 0.025 | 105 | 4 5/16 | 80 | 2 7/32 |
| RTD120CN | 12RTD | 12RTD-A | 20-120 | 2-12 | 2-12 | 1 | 0.1 | 0.05 | 120 | 4 31/32 | 125 | 4 7/16 |
| RTD260CN | 26RTD | 26RTD-A | 60-260 | 6-26 | 6-26 | 2 | 0.2 | 0.1 | 140 | 4 5/8 | 225 | 8 13/16 | Standard |
| RTD500CN | 50RTD | 50RTD-A | 100-500 | 10-50 | 10-40 | 2.5 | 0.25 | 0.25 | 150 | 6 1/8 | 330 | 11 5/16 | Option |
1.For models RTD260CN, 500CN, a hook spanner is suppliedasastandard accessory for setting torque.
2.For models RTD120CN, 260CN, a resin grip is standard.
3. This series accepts standard 6.35 (1/4) hex bits,soldseparately.Refer to bits page