主营产品：
日本SK牌针规，EISEN牌针规，螺纹塞规，螺纹环规。日本PEAK必佳牌放大镜，日本IMADA牌推拉力，日本KANON中村扭力工具,日本NAKANISHI中西主轴，马达，控制器。 日本PEACOCK牌千分表,百分表,杠杆表 日本ASKER、美国PTC橡胶硬度计，日本FSK富士水平仪，水平尺，精密花岗石平台支架等,KANETEC强力（日本） 磁性工具,高斯计；脱磁器；永磁吊重磁盘；永磁夹盘；电磁架，瑞士FISSO磁性表座，CITIZEN西铁城界限量表，德国KROEPLIN内测卡规，外测卡规，瑞士MARTIN三线规，美国PI TEPE圆周尺，瑞士TITEC微小螺纹规，美国UNIVERSAL同心度仪
产品展示 PRODUCT
- 日本金田
- 日本emic
- FLUORO福乐
- 日本SK数显水平仪
- 晶片镊子
- 美国PTC
- 美国查狄伦Chatillon
- 美国诺克莱恩LOC-LINE
- 美国UNIVERSAL同心度仪
- 美国PITAP圆周尺
- 瑞士REGINE皇冠牌
- 瑞士VENUS维纳斯
- 瑞士磁性座
- 瑞士CORREX确力士
- 瑞士ZEAL湿度计
- 瑞士TITEC微小螺纹规
- 瑞士PESOLA拉力计
- 德国ROCKLE精密水平仪
- 德国Kroeplin内外卡规
- 德国ROCKLE水平仪
- 德国SCHWENK缸规
- 德国DIATEST小孔量规
- 德国KOMEG三坐标测针
- 英国APIEZON阿佩佐
- 英国MICROSET微科达
- 英国COMARK压力计
- 日本SK针规
- 日本EISEN针规
- 日本MINIMO美能达
- 日本今田 实验机
产品详情
简单介绍：
日本PEACOCK孔雀量表 EMCC-2 内径测定器日本PEACOCK孔雀量表 EMCC-2 内径测定器日本PEACOCK孔雀量表 EMCC-2 内径测定器日本PEACOCK孔雀量表 EMCC-2 内径测定器
详情介绍：
日本PEACOCK孔雀量表 EMCC-2 内径测定器日本PEACOCK孔雀量表 EMCC-2 内径测定器日本PEACOCK孔雀量表 EMCC-2 内径测定器日本PEACOCK孔雀量表 EMCC-2 内径测定器日本PEACOCK孔雀量表 EMCC-2 内径测定器
The EMCC Series can easily measure the inside diameter of deep bore with high accuracy,
which has been precision-machined.
The EMCC Series advances a detector having an automatic alignment mechanism in line
with the inside diameter.
Measurement is possible up to the length of 10m by using an additional extension rod.
| Specifications | |||||||||||||||||||||||||||||||||||
| Model | EMCC-2 | EMCC-3 | EMCC-4 | EMCC-5 | EMCC-6 | ||||||||||||||||||||||||||||||
| Measuring range ( ID ) | 35 - 60mm | 50 - 100mm | 100 - 160mm | 160 - 250mm | 250 - 400mm | ||||||||||||||||||||||||||||||
| Measuring depth | 70mm - 10m | 90mm - 10m | 120mm - 10m | 130mm - 10m | 150mm - 10m | ||||||||||||||||||||||||||||||
| Provided rods | 6 rods | 11 rods | 7 rods | 10 rods | 16 rods | ||||||||||||||||||||||||||||||
| Provided contact point | L = 33mm ( flat type ) | L = 44mm ( flat type ) | |||||||||||||||||||||||||||||||||
|
Contact point's travel and measuring force |
1.4mm less than 2N | ||||||||||||||||||||||||||||||||||
| Extension rods | EMCC-L ( 1 meter rod × 10 rods = 10 meters ) ---> sold separately | ||||||||||||||||||||||||||||||||||
|
Compatible linear gauges ( 1 ) |
When Resolution is 10?m, use Peacock D-5BWhen Resolution is 1?m, use Peacock D-5SB
|
||||||||||||||||||||||||||||||||||
|
Compatible counters ( 2 ) |
C-500 ( 10?m, 1?m Type )
|
||||||||||||||||||||||||||||||||||
| Operations |
Test completes only after receiving reference from a master and inserting the micrometer head through a workpiece. Automatic centering mechanism requires no manual "shaking" to center up themicrometer head. |
||||||||||||||||||||||||||||||||||
| Functions |
Workpiece has to be horizontally level ( No test can be performed with the workpiece perpendicular ). |
||||||||||||||||||||||||||||||||||
| Options |
Printer ( PDP-1N ) Connecting cable ( KB-C232 )
|
||||||||||||||||||||||||||||||||||
|
Dimensions ( mm ) |
A | 70 | 71 | 77 | 77 | 77 | |||||||||||||||||||||||||||||
| B | 20 | 30 | 40 | 45 | 50 | ||||||||||||||||||||||||||||||
| C | 30 | 40 | 55 | 60 | 70 | ||||||||||||||||||||||||||||||
| D | 62 | 82 | 115 | 125 | 140 | ||||||||||||||||||||||||||||||
| E | 15 | 20 | 38 | 58 | 88 | ||||||||||||||||||||||||||||||
| F | 22 | 30 | 50 | 70 | 100 | ||||||||||||||||||||||||||||||
| G | MIN | 35 | 50 | 100 | 160 | 250 | |||||||||||||||||||||||||||||
| MAX | 60 | 100 | 160 | 250 | 400 | ||||||||||||||||||||||||||||||
|
To make up a complete working unit, it requires an EMCC ( 2 - 6 ), an EMCC-L ( extension rod set ), a linear gauge and a counter.
|
|||||||||||||||||||||||||||||||||||
Dimensions
