主营产品：
日本SK牌针规，EISEN牌针规，螺纹塞规，螺纹环规。日本PEAK必佳牌放大镜，日本IMADA牌推拉力，日本KANON中村扭力工具,日本NAKANISHI中西主轴，马达，控制器。 日本PEACOCK牌千分表,百分表,杠杆表 日本ASKER、美国PTC橡胶硬度计，日本FSK富士水平仪，水平尺，精密花岗石平台支架等,KANETEC强力（日本） 磁性工具,高斯计；脱磁器；永磁吊重磁盘；永磁夹盘；电磁架，瑞士FISSO磁性表座，CITIZEN西铁城界限量表，德国KROEPLIN内测卡规，外测卡规，瑞士MARTIN三线规，美国PI TEPE圆周尺，瑞士TITEC微小螺纹规，美国UNIVERSAL同心度仪
产品展示 PRODUCT
- 日本金田
- 日本emic
- FLUORO福乐
- 日本SK数显水平仪
- 晶片镊子
- 美国PTC
- 美国查狄伦Chatillon
- 美国诺克莱恩LOC-LINE
- 美国UNIVERSAL同心度仪
- 美国PITAP圆周尺
- 瑞士REGINE皇冠牌
- 瑞士VENUS维纳斯
- 瑞士磁性座
- 瑞士CORREX确力士
- 瑞士ZEAL湿度计
- 瑞士TITEC微小螺纹规
- 瑞士PESOLA拉力计
- 德国ROCKLE精密水平仪
- 德国Kroeplin内外卡规
- 德国ROCKLE水平仪
- 德国SCHWENK缸规
- 德国DIATEST小孔量规
- 德国KOMEG三坐标测针
- 英国APIEZON阿佩佐
- 英国MICROSET微科达
- 英国COMARK压力计
- 日本SK针规
- 日本EISEN针规
- 日本MINIMO美能达
- 日本今田 实验机
产品详情
简单介绍：
Digital Force GaugeDS2-2N DS2 Series specificationsDS2-2N D DS S2 2 S Se er ri ie es s
Popular Model Digital Force Gauge (with output)
详情介绍：
Digital Force Gauge DS2 Series specificationsDS2-2N
-------------------------------------------------------------------------------------------------------------------------------------------------
D DS S2 2 S Se er ri ie es s
Popular Model Digital Force Gauge (with output)
[Application]
-Measuring strength of electronic parts bonding or soldering
-Measuring of contact press for touch panel or keyboard
-Pull test of wire harness terminal
-Pull test of pull top can or noodle container lid
[Feature]
-Digital display of tension and compression forces
-Peak hold function (capable of holding maximum force value) is installed for all models as
the standard feature.
-Measuring units (kgf, N, lbf) are selectable.
-The display will flash when overload or low-battery condition is detected.
-Display can be reversed.
-Easy operation by big display and high usability operation panel.
2006/3/01
IMADA CO.,LTD. 2/3
[DS2 Series specifications]
Model DS2 series
Measuring units kgf, N, lbf / gf, N, ozf (Selectable)
Display 4 digits LCD, Units, Mode, Warning
Accuracy +/-0.2% of F.S. +/-1digit
Measurement
method
Track or Peak mode
Measurement time Maximam.1000 times / second
Display update 10 times / second
Overload capacity
~5N : 150% of F.S. (LCD blinks beyond 110%)
20N ~ : 200% of F.S. (LCD blinks beyond 110%)
Functions Peak/Track measurement mode, display reverse, comparator,
sampling speed selectable(2 steps)
Power supply Rechargeable NiMH battery pack (4pcs) or AC adapter
Battery use time 10 hours of continuous operation
Operating
temperature range
0 ~ + 40 degree Celsius
Weight About 420 g
Output Digital (Serial: RS232C)
Mitutoyo Digimatic
Analog (+/- 1 V F.S.)
Accessory 6 attachments
AC adapter (100V, 120V, 230V available) *Note1
Carrying case
*Note1) Since commercial power supply voltage varies in the area where the gauge is used,
three types of voltage adapters are available. Please specify the confirmed
voltage for the commercial power supply when you order.
[Available models]
Model Capacity Display Resolution
DS2-2N 2N (200 gf) 2.000N (200.0 gf) 0.001N (0.1 gf)
DS2-5N 5N (500 gf) 5.000N (500.0 gf) 0.001N (0.1 gf)
DS2-20N 20N (2 kgf) 20.00N (2.000 kgf) 0.01N (0.001kgf)
DS2-50N 50N (5 kgf) 50.00N (5.000 kgf) 0.01N (0.001kgf)
DS2-200N 200N (20 kgf) 200.0N (20.00 kgf) 0.1N (0.01kgf)
DS2-500N 500N (50 kgf) 500.0N (50.00 kgf) 0.1N (0.01kgf)
DS2-1000N 1000N (100 kgf) 1000N (100.0 kgf) 1N (0.1kgf)
2006/3/01
IMADA CO.,LTD. 3/3
[Dimension]
[Note]
*Do not apply excess force, torque, or impact on the measuring axis regardless to the power
is on/off.
*Do not use the gauge under the condition of the rapid temperature changes, high
temperature, high humidity, near water and dusty place.
*Keep the gauge in the exclusive carrying case when it is not used.
*The use of the test stand made by Imada is recommended for the stable measuring result.
*All information is subject to change without prior notice.
-------------------------------------------------------------------------------------------------------------------------------------------------
D DS S2 2 S Se er ri ie es s
Popular Model Digital Force Gauge (with output)
[Application]
-Measuring strength of electronic parts bonding or soldering
-Measuring of contact press for touch panel or keyboard
-Pull test of wire harness terminal
-Pull test of pull top can or noodle container lid
[Feature]
-Digital display of tension and compression forces
-Peak hold function (capable of holding maximum force value) is installed for all models as
the standard feature.
-Measuring units (kgf, N, lbf) are selectable.
-The display will flash when overload or low-battery condition is detected.
-Display can be reversed.
-Easy operation by big display and high usability operation panel.
2006/3/01
IMADA CO.,LTD. 2/3
[DS2 Series specifications]
Model DS2 series
Measuring units kgf, N, lbf / gf, N, ozf (Selectable)
Display 4 digits LCD, Units, Mode, Warning
Accuracy +/-0.2% of F.S. +/-1digit
Measurement
method
Track or Peak mode
Measurement time Maximam.1000 times / second
Display update 10 times / second
Overload capacity
~5N : 150% of F.S. (LCD blinks beyond 110%)
20N ~ : 200% of F.S. (LCD blinks beyond 110%)
Functions Peak/Track measurement mode, display reverse, comparator,
sampling speed selectable(2 steps)
Power supply Rechargeable NiMH battery pack (4pcs) or AC adapter
Battery use time 10 hours of continuous operation
Operating
temperature range
0 ~ + 40 degree Celsius
Weight About 420 g
Output Digital (Serial: RS232C)
Mitutoyo Digimatic
Analog (+/- 1 V F.S.)
Accessory 6 attachments
AC adapter (100V, 120V, 230V available) *Note1
Carrying case
*Note1) Since commercial power supply voltage varies in the area where the gauge is used,
three types of voltage adapters are available. Please specify the confirmed
voltage for the commercial power supply when you order.
[Available models]
Model Capacity Display Resolution
DS2-2N 2N (200 gf) 2.000N (200.0 gf) 0.001N (0.1 gf)
DS2-5N 5N (500 gf) 5.000N (500.0 gf) 0.001N (0.1 gf)
DS2-20N 20N (2 kgf) 20.00N (2.000 kgf) 0.01N (0.001kgf)
DS2-50N 50N (5 kgf) 50.00N (5.000 kgf) 0.01N (0.001kgf)
DS2-200N 200N (20 kgf) 200.0N (20.00 kgf) 0.1N (0.01kgf)
DS2-500N 500N (50 kgf) 500.0N (50.00 kgf) 0.1N (0.01kgf)
DS2-1000N 1000N (100 kgf) 1000N (100.0 kgf) 1N (0.1kgf)
2006/3/01
IMADA CO.,LTD. 3/3
[Dimension]
[Note]
*Do not apply excess force, torque, or impact on the measuring axis regardless to the power
is on/off.
*Do not use the gauge under the condition of the rapid temperature changes, high
temperature, high humidity, near water and dusty place.
*Keep the gauge in the exclusive carrying case when it is not used.
*The use of the test stand made by Imada is recommended for the stable measuring result.
*All information is subject to change without prior notice.
