搜索

主营产品：

日本SK牌针规，EISEN牌针规，螺纹塞规，螺纹环规。日本PEAK必佳牌放大镜，日本IMADA牌推拉力，日本KANON中村扭力工具,日本NAKANISHI中西主轴，马达，控制器。日本PEACOCK牌千分表,百分表,杠杆表日本ASKER、美国PTC橡胶硬度计，日本FSK富士水平仪，水平尺，精密花岗石平台支架等,KANETEC强力（日本）磁性工具,高斯计；脱磁器；永磁吊重磁盘；永磁夹盘；电磁架，瑞士FISSO磁性表座，CITIZEN西铁城界限量表，德国KROEPLIN内测卡规，外测卡规，瑞士MARTIN三线规，美国PI TEPE圆周尺，瑞士TITEC微小螺纹规，美国UNIVERSAL同心度仪

产品展示 PRODUCT

新闻详情

日本ASKER橡胶硬度计价格降低了

日期：2025-05-06 15:57

浏览次数：3099

摘要：

日本ASKER橡胶硬度计价格降低了日本ASKER橡胶硬度计长脚型主要针对测试一些比较小的或者凹凸不平的接触面，产品质量保证5年，本公司是总代理提供零配件及维修保养服务。欢迎来电咨询。AL型应用于一般橡胶、软质塑料（凹进部位）
产品名称: ASKERDurometer Type C1L
产品型号: C1L
产品展商: 深圳市腾明达精密仪器有限公司
简单介绍
ASKERDurometer Type C1L The ASKER Durometer Type C, produced since 1956,is our original brand durometer, and is a de facto standard in theworld for the measurement of soft rubber, sponges, etc.

ASKER Durometer TypeC1L的详细介绍

ASKER Durometer Type C1L

The ASKER Durometer TypeC, produced since 1956, is our original brand durometer, and is ade facto standard in the world for the measurement of soft rubber,sponges, etc.

Widely used for measuring soft rubber, sponges, and other foamelastomers, as well as rolled-threads, -films and textile windings(yarn packages).

Features

Indentor

Height: 2.54mm Shape:Spherical

Hardness Tester SelectionChart

Our product line consists of varioustypes of durometers applicable to specific materials
as indicated in the chart above.

Type A Durometer (ASKER A type), conforming to JIS K 6235 is themost popular type of durometer for measuring rubber hardness.

However, verification is recommended because a significantdifference is estimated to be the largest when a durometerindicates measurement values from 10 to 90 points.

For hard specimens for which Type A Durometer readings indicatemore than 90 points, measurements should be undertaken using theType D Durometer (ASKER D type). However, for soft specimens withmeasurements of less than 20 points, the ASKER C type or Type EDurometer (ASKER E type) should be used. The most importantconsideration in using durometers is to select the correct type forpurposes of measurement according to the specimen.

Specification

Standards

JIS K 7312
JIS S 6050

Indicationrange

0 point - 100 point (262 degree dialscale)

Minimumindication

1 point (Accuracy : ±1 point)

Indentor Design(mm)

Height: 2.54 5.08 Dia. Spherical

Spring Forces[mN(g)]

0 point:

539(55)

100 point:

8379(855)

Central hole ofdiameter of Pressure foot

Φ5.5

Pressurefoot
Dimension (mm)

f16 Longer foot type Length: 18

Outer Dimension(mm)

Approx. Width 57×Depth 30×Height 94

Weight(g)

200

Application

soft rubber, urethane foam, sponge,rolled-threads, film rolls and pottery clay, footwear

Outer Dimension(mm)

A custom designed pressure foot durometer is availableaccording to specimen conditions.

Option

Two-pointer type (max-hand and activehand) of Rubber Hardness Tester
The stationary set hand (max-hand) makes the maximum value easierto read and allows the creep characteristics of a specimen.

Accurate measurement is made possible for specimens* for whichstress relaxation occurs over time or for specimens for which it isdifficult to take readings from the front.

*Materials for which the reading decreases immediately after theindentor has been pressed against the surface.

Constant Loader forDurometer

·	Constant loarder assures uniform test pressure eliminatingfalse readings due to differences between operators in measuring byhand.
·	High accuracy and repeatability of the hardness readings areassured by the flexible joint function.

Indentor ExtensionTester

·	The gauge to check the indentor height on a durometer and thereading indicator mechanism.
·	Inspection is conducted at 2, 50, and 100 pointsrespectively.

Load Tester for HardnessTester

·	Tester to check load properties of the spring on a durometer
·	Inspection is conducted at 2, 50, and 75 pointsrespectively.

产品名称:ASKER橡胶硬度计D型
产品型号: D
产品展商: 深圳市腾明达精密仪器有限公司
简单介绍
主要测试比较硬的橡胶，塑胶等产品，本公司提供产品所有零配件及维修保养服务，欢迎来电咨询服务等。

ASKER橡胶硬度计D型的详细介绍

测量硬度的基本因素之一是确定不同橡胶, 人造橡胶及朔料制品的特性. 适合特点的设计简单方便的操作, 非破坏性测量的方法, 弹簧型的硬度计已经广泛被使用. 所有的硬度计的生产及校准是在专业人员的严格控制下进的, 可以保证并符合国内及国际标准.JIS K 6253 、ASTM D2240 、ISO7619 、DIN53505

D型用于测量硬橡胶和塑料
产品名称: 试验片测厚器
产品型号: SDA-12
产品展商: 深圳市腾明达精密仪器有限公司
简单介绍
JIS K 6250A法に準拠した板状試験片（ダンベル状試験片）用のデジタル測厚器です。φ5mmおよび8mmの2種類の測定子と分銅の組み合わせにより、測定圧はIRHD硬さ35未満・35以上、両方の試験片に対応できます。

试验片测厚器的详细介绍

JIS K 6250A法に準拠した板状試験片（ダンベル状試験片）用のデジタル測厚器です。

φ5mmおよび8mmの2種類の測定子と分銅の組み合わせにより、測定圧はIRHD硬さ35未満・35以上、両方の試験片に対応できます。

特徴

■ トレーサビリティ書類

ISO9000 シリーズで要求されるトレーサビリティをもった成績表の発行が可能です。

■プリンタ接続

プリンタとの接続が可能です。

仕様

準拠規格 JISK 6250 A 法

ISO 23529:2004

測定範囲mm 0 ～12

*小目盛mm 0.01

測定子形状mm φ5・φ8

試料台寸法mm 幅100 ×奥行110

用途 JISK 6250 A 法板状試験片用

電源電池式
产品名称: asker橡胶硬度计
产品型号: CL-150L
产品展商: 深圳市腾明达精密仪器有限公司
简单介绍
商品描述：特性：１．测量压力恒定２．使用带空气制动器的升降装置可保证测量速度恒定，asker橡胶硬度计１．测量压力恒定２．使用带空气制动器的升降装置可保证测量速度恒定，也可以通过可调把手调整升降速度