日本PEACOCK孔雀量表 EG-1 外径测量计 EG-1 深圳市鑫腾明计量仪器商行

搜索

主营产品：

日本SK牌针规，EISEN牌针规，螺纹塞规，螺纹环规。日本PEAK必佳牌放大镜，日本IMADA牌推拉力，日本KANON中村扭力工具,日本NAKANISHI中西主轴，马达，控制器。日本PEACOCK牌千分表,百分表,杠杆表日本ASKER、美国PTC橡胶硬度计，日本FSK富士水平仪，水平尺，精密花岗石平台支架等,KANETEC强力（日本）磁性工具,高斯计；脱磁器；永磁吊重磁盘；永磁夹盘；电磁架，瑞士FISSO磁性表座，CITIZEN西铁城界限量表，德国KROEPLIN内测卡规，外测卡规，瑞士MARTIN三线规，美国PI TEPE圆周尺，瑞士TITEC微小螺纹规，美国UNIVERSAL同心度仪

产品展示 PRODUCT

产品详情

查看大图

产品名称：日本PEACOCK孔雀量表 EG-1 外径测量计
产品型号：EG-1
产品厂商：
产品文档：

你添加了1件商品查看购物车

简单介绍：

日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计

详情介绍：

日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计

Easy measurement of thickness, outer diameter, inner diameter and depth.

Handy size with excellent functions.

Minimum reading : 0.1mm.

EG-1 for measurement of inner diameter, outer diameter and thickness.

EG-2 for measurement of inner diameter, outer diameter and thickness and depth.

How to use Snap Caliper ( EG-1, EG-2 )

Name of parts

To measure thickness and diameter of balls :

(1) First, press down a knob to check whether a pointer shows 0.

(2) As shown in the drawing II , put an object for measurement between a contact point

and anvil, and read a position of pointer on a dial plate. A division of scale is 0.1 mm,

so read the values on the dial 1, 2, 3... as 1, 2, 3 mm... ( After one rotation, it shows 11,

12, 13 mm... )

(3) One rotation of a pointer shows 10 mm. Check whether it is first or second rotation by

reading a spindle scale indication.

( Example ):A pointer shows 6 at your measurement:

1st rotation --> 6 mm, 2nd rotation --> 16mm

To measure thickness and diameter of balls

To measure groove width and inner diameter :

(1) Press down a knob and have a contact point and anvil contacted fast, then rotate an

outer frame of gauge so that a division of 3 on a dial plate meets a position of pointer.

(2) Pressing down a knob by your fingers, insert the tips of contact point and anvil into the

inside of an object for measurement, and slowly release a knob, as shown in the

drawing III

( Notice ) :Measure an object at right angles to a groove. If you measure it diagonally,

a value larger than the actual one will be indicated.

To measure groove width and inner diameter

To measure depth and step depth -( EG-2 only is available. )

(1) Rotate an outer frame of gauge so that a pointer meets 0 on a dial plate, by putting

a flat plate on the reference level of gauge. ( If there is no adequate plate, put your

gauge upside down, and press the reference level of gauge on a flat table ).

(2) Press your gauge down to the measuring part of an object for measurement, as

shown in the drawing IV

To measure depth and step depth (EG-2 only is available.)

Major Specifications

(1) A division of scale 0.1mm

(2) Measuring Range for measurement of thickness 0 ～ 20mm

for measurement of inner diameter 3 ～ 23mm

for measurement of depth 0 ～ 20mm

(3) Weight EG-1 ; 97g EG-2 ; 100g

Remarks

After your finising measurements of internal diameter and step depth, adjust a pointer so

as to meet 0 on a dial plate for thickness measurement.

标题：

内容：

联系人：

联系电话：

Email：

公司名称：

联系地址：

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!

2.如有必要,请您留下您的详细联系方式!

产品名称：日本PEACOCK孔雀量表 EG-1 外径测量计